CTE PIANOPLAN 600 J SPEEDY STANDARD, Руководство по техническому обслуживанию оператора, Страница: 41 / 62

Operator’s and Maintenance Manual
Pianoplan 600J Speedy Standard
CODE
504196
41
DANGER : it is prohibited to climb the stairs, if they are wet, if there is ice or
if the tracks are wet.
5.
Carry out some tests activating all the controls: moving the platform ahead and back,
lifting the Pianoplan, moving the tracks forwards and backwards, etc.
6.
Check the functioning of the emergency stop.
Do again the tests activating all the controls and stop the movements pushing the
emergency stop button. Pushing this button, the machine must stop immediately. In
case of anomalies, call the CTE After-sales Dept.
7.
Check that there are no oil leaks from hoses, joints, cylinders, motor-driven pump and
block valve. If you see some leaks, call the CTE After-sales Dept.
ATTENTION : if there is an oil leak, and the oil is in
contact with the track, there could be a loss of grip
with dangerous consequences.
8.
Check the correct working of the electromagnetic brake and the good state of the tracks,
leaving the Pianoplan for some minutes on the stair. The Pianoplan must not move. If it
does, call the CTE After-sales Dept.
9.
Check the anchor belts and straps of the load.
Confirm the good state of the belts and straps, especially near the stitching. If they are
frayed or crushed, replace them immediately. Check also the tension and all the parts of
the belt that must be mechanically intact, complete and efficient.
ATTENTION : it is prohibited to use greased or wet
belts and bands, or belts which are not authorized by
the manufacturer.