CTE PIANOPLAN 600 J SPEEDY STANDARD, Руководство по техническому обслуживанию оператора, Страница: 23 / 62

Operator’s and Maintenance Manual
Pianoplan 600J Speedy Standard
CODE
504196
23
5.4. Instructions to fasten the load
ATTENTIN: lay flat the Pianoplan and put it stowed position
before executing this operation.
(Key on OFF position – rollers fully
retracted and tracks in contact with the “ground”).
The load is fixed with the large strap you received with the Pianoplan, placed in the back of
the Pianoplan and the tension system (ratchet strap) of the band, placed in the front part.
•
Fix the red strap on the back part of the platform
passing the pin inside the strap ring and tightening
the pin with a screwdriver.
•
Pass the strap over the load.
•
Pass the tensioning system of the strap through
the foreseen loops fixed on the basement of the
steering bar.
•
Fix carefully the load passing the strap through the anchoring loop on the machine and
then through the tension system strap.
•
Apply tension until you have correctly secured the load.
•
For even greater security, it may be
necessary to use additional straps.
DANGER: IT IS OBLIGATORY TO CORRECTLY AND SAFELY
SECURE THE LOAD BEFORE MOVING THE PIANOPLAN.