CTE PIANOPLAN 600 J SPEEDY STANDARD, Руководство по техническому обслуживанию оператора, Страница: 13 / 62

Operator’s and Maintenance Manual
Pianoplan 600 J Speedy Standard
CODE
504196
13
2.3.4 Maintenance and repair
DANGER! Before starting any service or maintenance operation,
remove the ignition key and disconnect the system.
•
The MAJOR maintenance and repair must always be done, exclusively, by specialized
persons, instructed and authorized (technical maintenance).
•
For the ROUTINE maintenance, the operator is responsible for the machine which
has to be clean from extraneous bodies such as debris, oil or other components. That
is why, it is necessary to clean the machine having finished working with it. During
the cleaning the machine must be stopped, in a stable position.
IT IS PROHIBITED DURING THE CLEANING OF THE
MACHINE TO USE HIGH PRESSURE AIR OR WATER.
IT IS PROHIBITED TO USE INFLAMMABLE FLUID DURING
THE CLEANING.
When the cleaning of the machine is finished, the operator must check there are no worn,
damaged or loose parts (if necessary, ask immediately for the intervention of the
maintenance technician).
Protection and safety systems for the machine must ONLY be removed if you
have to repair and/or to service the machine.
In any case, before using the machine, all protections and security parts must be
replaced and reset
IT IS OBLIGATORY FOR THE OPERATOR TO STOP USING THE
PIANOPLAN IF A BREAKDOWN, WHICH CAN COMPROMISE
THE PHYSICAL INTEGRITY OF THE NEXT USER OR
IRRETRIEVABLE DAMAGE TO THE EQUIPMENT, HAS BEEN
FOUND.
When the maintenance operations are finished, the operator must move away from the
machine all the objects which are not integral part of the machine (for example the tools
used after an intervention, cables used for the transport of parts, objects, etc.
USE ONLY SPARE PARTS CONFORMING TO THE TECHNICAL
REQUIREMENTS OF THE MANUFACTURER.
WE RECOMMEND YOU ONLY TO USE ORIGINAL CTE SPARE PARTS.