CTD Iguane 120-30, Руководство пользователя, Страница: 15 / 31

15
5 - FILLING :

Go to filling tank menu from maintenance screen.

Select product to fill

Connect a suction pipe on the external suction connector

Start the engine of the Gecko (if necessary).

Press “
VALIDATE
” to start filling
[1]
.
[
1 ] [ 2 ]

The system automatically primes (mini 5s) and then fills the required tank.

You can press “ CANCEL ” key [2] to stop the filling.
→
If you wish to continue, press “ NO ”.
→
To resume filling, press “ VALIDATE ” key [1] .
→
If you want to stop, press “
YES
”.

After stopping, the system automatically flushing itself.

Press « EXIT » to exit.
NB : Filling stops automatically when the tank is full.
6 - AUTONOMY :

If the option is selected, the system calculates the remaining autonomy while the product
is being measured out.

Autonomy is displayed in minutes under the tank of product used.

This autonomy is calculated according to the level of product remaining in the tank and
the product proportioning flow rate.

If less than 2 minutes of autonomy are left, display of autonomy disappears and the mes-
sage “TIME REMAINING < 2 MIN” flashes on the right of the level in the water tank.
=> Prepare to switch to an external product source if possible.
Foam concentrate
filling
Additive
filling
Intervention procedure