CTC Union SHRM03b TDM Series, Руководство пользователя

Страница: 80 / 138

80
3.8.1 System
Our cursor is already on the "show system" command, so press ENTER and the
following screen will display the general system information.
Most of the information on this screen is either self explanatory or it is simply
irrelevant for the end user. However, two items, the Kernel and FPGA (Field
Programmable Gate Array) version will give the software and hardware
versions respectively of the line card. These are important to know in case new
firmware becomes available in the future to add extra functions of to fix
unknown bugs from the original manufactured equipment. Please make note
of the Kernel MCSV and FPGA MCSV items in the above screen. These show
the Kernel and FPGA versions as follows:
114 means version 1.14
009 means version 0.09
Upgrading the line cards is done through the terminal connection with the
Xmodem protocol. The upgrade procedure will be explained in detail later in
this manual.
3.8.2 Config
It can display the all configuration value of this line card. The following show all
models’ configuration page and their default values. When using 2 wire mode,
there have two channel’s data been displayed as the page.