35
Figure 44: Add a QoS Classification
The screen creates a traffic class rule to classify the upstream traffic, assign queue
priority which defines the precedence and type of service. A rule consists of a class
name and at least one condition below. All of the specified conditions in this
classification rule must be satisfied for the rule to take effect. Click 'Apply/Save' to
save and activate the rule.
Global Setting
Enter the
Traffic Class Name
Select the
Rule Order
and
Rule Status
from the list
Select the
Class Interface
from the list
Select the
Ether Type
from the list
Enter the
Source MAC Address, Source MAC Mask, Destination MAC Address
and
Destination MAC Mask
Select the
Specify Class Queue
from the list
Select
Differentiated Service Code Point (DSCP) Mark
from the list. If the field is
not empty, the corresponding DSCP byte in the IP header of packet will be
overwritten by the selected value.
Select the
802.1p Priority
from the list
Set the
Tag VLAN ID (0-4094)
Содержание GW-632FW
Страница 1: ...I GW 632FW Active Ethernet IAD with VoIP Wireless LAN and Gigabit Ethernet Switch...
Страница 21: ...16 Figure 13 Device Voice Status...
Страница 91: ...86...
Страница 92: ...87...
