24
LAN
Figure 26: LAN Configuration
Global Settings:
Select the Group Name from the list
Enter the
IP address
which the CPE in the LAN will use to connect to the device.
For example, enter 192.168.1.1
Enter the
Subnet Mask
. For example, enter 255.255.255.0
Check to
Enable IGMP Snooping
. This feature will snoop all of IGMP packets and
record related information. Therefore, multicast packets will be generated to the
related LAN ports only to avoid the packet flooding on all of LAN ports. Select
one of two modes,
Standard mode
or
Blocking mode
.
Check to Enable the LAN site Firewall
Select to
Enable or Disable DHCP server
. If it is enabled, please enter the DHCP
IP pool of
Start IP address
and
End IP address
. Enter the value of
leased time
in
hour about the valid period of assigned IP address. The DHCP server ON
(enabled) feature will enable this device to assign IP address automatically to PC
in LAN if PC requests an IP address by DHCP client protocol.
Besides the dynamic assignment of IP address, you can configure the static IP
address too which will be reserved for the device with specified MAC address
only. Click
Add Entries
to enter MAC address of the device and fixed IP address.
You could check the entry and click
Remove Entries
to remove it.
Check to enable and configure the
second IP address and subnet mask for LAN
Содержание GW-632FW
Страница 1: ...I GW 632FW Active Ethernet IAD with VoIP Wireless LAN and Gigabit Ethernet Switch...
Страница 21: ...16 Figure 13 Device Voice Status...
Страница 91: ...86...
Страница 92: ...87...
