CTC Union FSW3208M, Руководство пользователя

Страница: 32 / 36

32
2.3.4 Config File
Choose and click command manual, diagram will be shown, and then direct the location of
the file that is to be backup, give a name, then press " Backup "
Configuration File Backup/Restore
Configuration File Backup
Choose and click command manual, diagram will be shown, and then direct the location of
the file that to be restored, then press " Restore " It will show transfer completed if it success.
Configuration File Restore
3.0 Terminal Mode Management
Terminal mode is easy to operate, it is useful when in-band Ethernet communication is
malfunctioning, or user has to use CLI interface operation, or he wants to know some parameter
setting, for example, before in-band management through Ethernet, user has to know the IP address,
subnet mask, …etc, he may get this information by checking the configuration under IP command,
he also may try to modify the IP address, CPU management group used in tag-VLAN configuration
operation, or any other function through terminal mode. And most convenient, if user is used to
configure the tag-VALN through terminal mode, he won’t be interfered by the CPU management
group issue, CPU is always being connected with him while he is configuring the VLAN.
User must set up the terminal parameters, such as Hyper terminal in Microsoft Window,
Select COM #: COM 1, COM 2, …then,
Set Baud rate to:
115,200, per second
Set Attribute to 8, None, 1, None ( 8 bit, No parity, 1 stop bit, No protocol in hardware )
Once terminal is connected, enter the password, the basic operation are shown, and then when
press " ? " the commands at top level will be shown as below.
Backup
Restore