CTC Union FSW3208M, Руководство пользователя

Страница: 31 / 36

31
2.3 Maintenance
2.3.1 Warm Reboot
Choose and click command manual, diagram will shown like below, user can press Yes or No
Warm Reboot
Are you sure you want to perform a warm reboot?
Yes No
2.3.2 Factory Default
Choose and click command manual, diagram will shown like below, user can press Yes or No
Factory Default
Are you sure to reset configurations to factory default?
Yes No
2.3.3 Firmware Update
Choose and click command manual, diagram will be shown, and then direct the location of
the file that is to be updated, then press " upload ", if success, it will be shown below
Software successfully loaded
Do you want to activate new software?
Yes No
Press, "yes" then you get new code to execute, however, after activate the new code, then, 5
~ 10 seconds later, press "reset button" at front panel so that the new default setting will be
also updated, because different version of code is usually with different data structure of initial
default setting
Note: Pressing and holding the reset button to perform a factory reset is
very important in order to ensure further smooth operation on the switch
after software upgrade.