CTC Union FSW3208M, Руководство пользователя

Страница: 16 / 36

16
1.
VLAN Aware mode:
Enable – When Tag-VALN function is applied on this port, user may enable VLAN Aware
associated with this port, then ingress frames and egress frames will be handled
according to the following parameters’ setting.
Disable – default state, this means, switch doesn’t do VLAN tag stripping and insertion.
2. Ingress filtering:
Enable - Check ingress frame VLAN ID. Ingress frame will be dropped if this frame's VID
is not the same as the VID of the ingress port which belongs to a member of a
VLAN group
Disable – the Ingress frame will be flood if VID is not the same
3. Accept Packet Type:
ALL - Accept all ingress frames
Tagged only - Only accept ingress frames with VLAN tag
4. Port VID:
Set Port VID = value (1 ~ 4096), then an untagged ingress frames will bear this value a its
VID, usually this port is connected to un-tag device ( legacy device ), then this frame become
a tagged frame, hence, it can be handled inside the switch as a member of same VID group.
Set "None" for those tagged frames, usually this port is now connected to a tag-device
5. Egress Tag enable
When Egress Tag is enabled, then, the tag will be added into egress frames and then sent out
to the device that support tagged-VLAN, when this is disabled, tag will not be added into
egress frame and then sent to device that does not support tagged-VALN.