CTC Union FSW3208M, Руководство пользователя

Страница: 15 / 36

15
If VLAN 10 and VLAN ID 20 must be isolated, then user must delete member port 5,6,7,8 in
default VLAN group(VID = 1). See below
Be aware that CPU port is still remaining on VID=1 group now, user can only perform web
management through one of 4 ports, that is port 1,2,3,4, but if user want to perform web
management from other port existing in different VLAN group, for example port 8 in
VID =10, then after creating new VLAN groups, he must go to System Configuration
page, and select Tag VLAN Management Group to 10 by pressing " Apply " command,
then move RJ-45 (web management port) from port 1 to port 8, then user can perform web
management from new RJ-45 port again. But if user forget what group that CPU belongs to,
there are two ways to solve this condition below.
(1) Through console port, check Configuration of IP if he gets password, or
(2) Press "Reset" button few seconds, let system return to default settings, that is,
---- >> IP address=192.168.223.100; … VID=1, all settings return to factory default
After assign a tag VLAN, there are some attributes parameters must be assigned for some
tag-VLAN application, here below are explanation when entering the " Port Config ", they are: