CTC Union FRM220A-GSW/SNMP, Руководство пользователя

Страница: 25 / 52

Chapter 3 Web Based Management
3.2.6.5 Password Setup
Enter the old password, if there is one, and enter
new password twice. Click “Save”.
3.2.6.6 Monitor
The Monitor screen will display system information
for the type and status of Power 1 and Power 2, the fans
status and RPM, the GSW CPU temperature and the
GSW card board temperature (in Centigrade).
3.2.6.7 Alarm Setup
The Alarm screen will display current alarm status.
Inactive means there are currently no alarms. Active
means an alarm condition exists. The Alarm
configuration is default by powers and fans, but each
Alarm supports “user” configuration. The “user”
configuration is shown in the “User Define Configuration”
section. There are definitions for Alarm 1 and for Alarm 2.
Select the alarm conditions by checking the required
check boxes. Hit “Refresh” to see if any new alarms exist.
Hit “Save” to save the alarm settings. Hit “Reset” to
return to the factory settings.
3.2.6.8 Parameters
The GSW/SNMP has backup and restore functions
that work at a card level (backup individual card or all
cards to PC, or restore parameters from a backup file on
PC to single card or all other like cards).
The ‘Copy Parameters From The Line Card to
Another’ tab is used for internal management of
parameters and provides the ability to quickly clone
parameters from one card to another ‘like’ card in the
same chassis.
25