CTC Union FRM220A-GSW/SNMP, Руководство пользователя

Страница: 16 / 52

Chapter 2 Provisioning
From the System Status and Configuration menu, type ‘2’, System Configuration.
<< System Configuration >>
<1> :System Contact []
<2> :System Name []
<3> :System Location []
<4> :DHCP Client [Disable]
<5> :DHCP Renew [192.168.1.1]
<6> :IP Address [192.168.1.1]
<7> :Subnet Netmask [255.255.255.0]
<8> :Default Gateway IP [192.168.1.254]
<9> :Apply IP Configuration.
<A> :TFTP Server IP [192.168.1.2]
<B> :TFTP File Name [Alone.dat]
These are the default TCP/IP settings.
You can directly connect by web
browser if you have configured your
Ethernet connected PC for this subnet.
<C> :Do TFTP and Update Software.
<T> :Date and Time.
<ESC>:Go to Previous Menu.
The first three items provide the MIB-2 with these contents. If the GSW/SNMP is to get IP address dynamically, then enable
the DHCP Client. For static IP assignment, fill in items 6, 7, and 8. Edit items A & B to provide update for the GSW card.
Item 9 is used to apply the settings made.
Item C starts the update process.
1 : Use this key to set the System Contact for the SNMP MIB-2.
2 : Use this key to set the System Name for the SNMP MIB-2.
3 : Use this key to set the System Location for the SNMP MIB-2.
4: Use this key to enable DHCP Client for dynamic TCP/IP
5 : Use this key to set the
6 : Use this key to set the IP address of the GSW.
7 : Use this key to set the Subnet Mask of the GSW.
8 : Use this key to set the default gateway address for the GSW.
9 : This key will apply the IP settings to the GSW.
A : Use this key to set the IP address of the TFTP server, used for upgrading.
B : Use this key to set the update image filename to be transferred by TFTP.
C : This key will initiate the TFTP image transfer and flash upgrade the File System.
T : This key will bring up the network time setting menu.
ESC : This key will write any changes and leave the system setting menu.
NOTE: If changing the IP address, subnet mask or default gateway, applying the settings, i.e., by selection
<9> : Apply IP Configuration, will take place immediately. You will lose contact until revising the manager PC IP
settings to match the new TCP/IP setup.
16