CTC Union EcoPart XL 424, Руководство по установке и обслуживанию

Страница: 7 / 32

7
CTC EcoPart XL
General
Don't forget!
Double check the following points at the time of delivery and installation:
• The product must be transported and stored upright.
• Remove the packaging and check before installation that the product
has not been damaged in transit. Report any transport damage to the
carrier.
• Place the product on a firm surface, preferably made of concrete.
If the product will be standing on a soft carpet, soft pads must be
placed under the adjustable feet.
• Remember to leave a service area of at least 1 metre in front of the
product.
• The product must not be placed below floor level either.
• Avoid placing the product in rooms with thin walls, as people in the
adjoining room may be disturbed by the compressor and vibrations.
• Ensure that the dimensions of pipes used between the heat pump and
the heating system are adequate.
• Ensure that the circulating pump that pumps water to the heat pump
has sufficient capacity.
Safety precautions
The following safety precautions must be observed when handling, installing
and using the product:
• Turn off the safety (power) switch before doing any work on the
product.
• The product should not be flushed with water.
• When handling the product with a lifting eye or similar device, ensure
that the lifting equipment, eyebolts and other parts are not damaged.
Never stand under the hoisted product.
• Never jeopardise safety by removing bolted covers, hoods or other
parts.
• Never jeopardise safety by deactivating safety equipment.
• Any work on the product's cooling system may only be performed by a
qualified professional.
• This product is intended exclusively for indoor installation.
!
If these instructions are not followed during installation, operation and
maintenance, Enertech's obligation under the applicable warranty terms is not
binding.