CTC Union EcoPart XL 424, Руководство по установке и обслуживанию

Страница: 6 / 32

6 CTC EcoPart XL
General
Check list
The check list must always be completed by the installer
• If a service is needed, you may be required to provide this document
• The installation must always follow the instructions provided in the installation and maintenance
manual
• The installation shall be carried out in accordance with all current and relevant building, water and
electrical standards and accredited organizations recommendations
After installation, the system must be inspected and functional checks performed as indicated
below:
Pipe installation
†
The heat pump is filled, positioned and adjusted in the correct manner according to the instructions
†
The heat pump is positioned so that it can be serviced
†
Capacity of the charge/radiator pump (depending on system type) for the flow required
†
Open radiator valves (depending on system type) and other relevant valves
†
Tightness test
†
The system has been bled
†
Check the requisite safety valves operate properly
†
Requisite waste pipes connected to floor drain (depending on system type)
Electrical installation
†
Power switch
†
Cable connections are tight
†
Requisite sensors fitted
†
Accessories
Customer information (adapted to the installation in question)
†
Start-up done with customer/installer
†
Menus/control for selected system
†
Installation and maintenance manual supplied to customer
†
Check and filling, heating system
†
Information on fine adjustments
†
Alarm information
†
Functional test of safety valves fitted
†
Warranty and insurance
†
Information on how to report a fault
______________________________________ ______________________________________
Date / Customer Date / Installer