CTC Union EcoPart XL 424, Руководство по установке и обслуживанию

Страница: 13 / 32

13
CTC EcoPart XL
General
4. Installation
This chapter is aimed at anyone responsible for one or more of the
installations required to ensure that the product works in the way the
property owner would like.
Take your time going through the functions and settings with the property
owner and answer any questions they may have. Both you and the pump
benefit from a user who fully understands how the system operates and
should be maintained.
The installation shall be carried out in accordance with current standards
within the relevant country, see building, water and electrical, regulations
and governing bodies for the installation of renewable technologies within
your region. The product must be connected to an expansion vessel in
an open or closed system. Do not forget to flush the radiator systems
clean before connection. Apply all the installation settings based on the
description in the chapter called First start.
The heat pump operates with a flow/return temperature across the
condenser of up to 65/58°C.
Transportation
Transport the product to the installation site before removing the packaging.
Handle the product using one of the following methods:
• Forklift truck
• Lifting straps around the pallet. Note: Can only be used with the
packaging on.
Removal of packaging
Take off the packaging when the heat pump is next to its installation site.
Check that the product has not been damaged in transit. Report any
transport damage to the carrier. Also check that the delivery is complete
according to the list below.
Scope of delivery:
• 1 x CTC EcoPart XL heat pump
• 1 x safety valve (½" 3 bar)
• 4 x check valves (1¼")
• 4 x dirt filters (1¼")
• 4 x rubber grommets (D=60)
• 4 x edge mouldings (186 mm)
• Additional cable for CTC Basic Display (cooling module 1)
!
The product must
be stored and
transported upright.