CTC Union CTC 380 IC, Инструкция по установке и техническому обслуживанию

Страница: 11 / 76

CTC 380 IC
11
9a. Basic unit Siemens RVS43.143
9b. Operating unit Siemens AVS37.294
9c. Power pack Siemens AVS16.290
10. Levelling feet M10
13. Rear cover plate – spiral finned tube
14. Top cover plate – spiral finned tube
3.3 Description
The principle parts of the construction are made from tailor-made steel panel.
The boiler was subject to a pressure and leakage test and coated with close heat insula-
tion and powder-covered cladding panels.
1. Flue gas outlet
Connection to the rear.
2. Heat insulation
The entire boiler is equipped with a special heat insulation in
order to minimise heat loss.
3. Combustion chamber
The generous layout of the combustion chamber provides the
coordinated unit oil burner with ideal combustion properties.
4. DUOPLUS temperature system
The combustion chamber or heat recovery adjuncts are sur-
rounded by two coatings which allow dewpoint corrosion-safe
low temperature and a long lifecycle.
5. Ripples
Boiler sizes 35 and 43 kW are equipped with ripples. This
increases the heat exchanger surface and allows optimum heat
transmission to the heating water.
6. Turbulators
The task of the turbulators is to provide turbulence in the
heating gases so that more heat energy is transmitted to the
boiler water. All boiler sizes are equipped with standard turbulators ex works which are ideally aligned to every size.
The turbulators can be accessed from the front.
7. Cleaning door
Thanks to the generous cleaning door, the turbulators can be easily accessed and the heat recovery adjunct can
at the same time be easily accessed for maintenance and cleaning.
8. Swivelling arm
The cleaning door is equipped with hinges which serve as swivelling arm. This makes removing the oil burner
for inspection and service.
9. Levelling feet
The boiler is equipped with four adjustable feet.
10. Power pack
The power pack of the boiler control panel – Siemens AVS16.290. For further information, please refer to
Section Electric installation – comfort control.
11. Basic unit
The basic unit of the comfort control – Siemens RVS43.143. For further information, please refer to Section Electric
installation – comfort control.
12. Operating unit
The operating unit of the comfort control – Siemens AVS37.294. For further information, please refer to Section
Electric installation – comfort control separate attached instructions.
13. Oil burner
For further information, please refer to Section Oil burner.
14. Hood
The hood is an integrated, nicely shaped component of the boiler.
11
10
12
8
14
7
4
3
2
1
5
6
15
16
17