CSS i-Control, Руководство по эксплуатации и техническому обслуживанию

Страница: 13 / 19

i
-Control User Manual
3
i
-Control Web Interface
i - Control web interface is controlled by Java applets. You will need the Java™ Runtime
Environment version 1.4.2 by installed on your computer to load the applets. See section 2.1
requirements for further details.
If your system is not up-to-date with the runtime environment your browser will prompt you to
download the latest Java™ 2 Runtime Environment from Sun Microsystems.
i - Control has two web interfaces:
ƒ
i
- Control Controls
ƒ
i
- Control Configuration
i - Control web interface gives hyperlinks for easy navigation between the two web interfaces.
i
- Control is password protected and case sensitive. Factory default password for both web
interfaces is set to be “password”. These passwords can be changed only on the i - Control
configuration web interface.
3.1 i-Control Control Interface
You can enter the i - Control control interface by typing the IP address in the address bar of
your browser. Eg: http://192.168.1.220
Alternatively you may configure your WINS (Windows Internet Name Service) to provide a
name resolution for the adapter from NetBIOS names to IP addresses for Windows PCs.
You will need to enter the appropriate password to gain access to
i
- Control.
This web interface will allow you to connect or disconnect your telephone line as desired. It
will also allow you to refresh the most recent telephone line status.
Available Controls
Enable: Link telephone line
Disable: Break telephone line link
Cycle Status: Cycle link status for the
given period
Refresh: Refresh the current link status
Logout: Logout from
i
- Control
You can control i - Control by clicking on the appropriate button.
During a cycle status other buttons are disabled except for the abort button. If you abort the
cycle status, the last known link status will remain active. You can change the cycle period on
i - Control at its configuration applet.
i -Control User Manual - 6 - 30/04/2004