CSI Wireless DGPS MAX, Справочное руководство

Страница: 51 / 176

DGPS MAX Reference Manual
31
thread to a 5/8
th
inch survey-style thread is available from CSI Wireless,
discussed in Section 2.5.3.
Thread the CDA-2MAX Antenna onto the mount, tightening by hand only.
Do not use any tools for tightening, and do not over-tighten.
Caution - A ¾ NPT or pipe thread is not compatible with the
thread of the CDA-2MAX. Use only a 1-14-UNS threaded mount
to prevent damage to the antenna enclosure. This type of
damage is not covered under warranty.
Caution - Install the antenna only hand-tight. Damage resulting
from over-tightening the antenna is not covered by warranty.
2.4.3 Antenna Installation – Surface Mount
The CDA-2MAX antenna comes with a PVC base pre-installed for
mounting on a 1-14-UNS threaded mount installed. This base may be
removed for surface mounting the CDA-2MAX, if desired.
To mount the CDA-2MAX in this fashion, you must use four 4-40 screws
in order to secure the antenna to the mounting surface. Their length will
be dependant upon the thickness of the mounting surface used. To
determine the location of the screw holes, use the PVC base as a template.