manualshive.com logo in svg

CSI Wireless DGPS MAX, Справочное руководство

Поделиться
Скачать
CSI Wireless DGPS MAX Скачать руководство пользователя страница 40

 

DGPS MAX Reference Manual 

20 

used where the WAAS signal has shown not to be sufficient.  Beacon 
signals are another free service, where available.  To use the  OmniSTAR 
DGPS service, you must purchase a user subscription.  Refer to Appendix 
C for further information on activating an OmniSTAR subscription within 
your DGPS MAX receiver 

The GPS engine of the internal SLX receiver provides high performance 
positioning for a variety of markets.  This design is capable of providing up 
to 5 Hz position output with an accuracy of less than 1.2 m 95% 
confidence. 

The SLX receiver inside the DGPS MAX features a built-in WAAS 
demodulator that provides free access to this service.  The WAAS engine 
decodes the WAAS signal and localizes the wide-area correction data for 
use at the current location.  Operation of the WAAS receiver is fully 
automatic, requiring no operator intervention. 

The MAX’s internal L-band differential satellite receiver features an auto-
scanning mode where it will reacquire a valid signal if the current one 
becomes unavailable.  The L-band DGPS receiver generates Virtual Base 
Station GPS corrections by localizing the wide-area data using position 
input from the GPS receiver inside the DGPS MAX. 

The beacon receiver embedded within the DGPS MAX is CSI Wireless’s 
SBX dual channel, minimum shift keying (MSK), demodulator.  It receives 
GPS correction information broadcast by medium frequency DGPS 
radiobeacons.  The SBX passes these corrections to the internal GPS 
engine that computes DGPS positions.  CSI Wireless’s web site at 

www.csi-wireless.com

 provides current DGPS radiobeacon coverage and 

site information.  This receiver operates automatically by default, however, 
an option is available to tune this engine manually. 

The 2-line by 16-character liquid crystal display (LCD) and menu system 
provide access to all three internal sensors.  The DGPS MAX uses a 3-
button keypad for menu system navigation.  The menu system allows you 
to operate each internal sensor and monitor signal status. 

Содержание DGPS MAX

















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды