CSE Kingfisher PLUS+, Справочник по аппаратуре

Страница: 14 / 89

Superseded Hardware Manual 7.12 Page 14
P S -10/P S -20 – S ta n d a rd S p e c ific a tio n s
Input Supply
90 to 260 VAC 50/60 Hz (PS-10)
+20 to +60 VDC or –20 to –60 VDC (PS-20)
Note: the module can also be powered using 12 to 13.8 VDC when
powered from the backup battery terminals.
Backup Battery 12 VDC, 26 AH max. Sealed Lead-Acid
Outputs +5 VDC @ 2 A Max. to Bus
+12 VDC @ 4 A Max. to Bus
+12 VDC @ 4 A Max. to Battery
+24 VDC Isolated @ 400 mA Max. to Field (optional)
+13.8 VDC @ 3.6 A Max. to Radio
Maximum output power: 50 W
Isolation 3 kV AC input/DC output
3 kV Isolated 24 VDC output
Deep Discharge
Protection RTU Shutdown at 10.5 V + 0.2 V
RTU Startup at 11.8 V + 0.2 V
Supply Fuse Slow blow internal
1.6 A (PS-10) or 6.3 A (PS-20)
Battery Fuse 4 A Polyfuse (self-resetting)
Connector Removable for AC/DC connections
LED indicators
(Standard) Vsup DC voltage present
Vb Battery voltage present
5 V 5 V present
Vaux Auxiliary converter present
Monitoring Processor
(Optional) Monitoring Circuits:
Battery Current
Battery Voltage *
Supply Current *
Temperature
Detection circuits:
AC present
Battery low
Aux. 24 V present
Control circuits:
Aux. 24 V on/off
Radio power on/off
LED indicators:
OK Microprocessor Watchdog
Batt CHG Battery Charging
FL Float Charge
BO Boost Charge
LO Battery Low
* The battery voltage is monitored when the input supply is disconnected. While the input supply is
connected, the module will measure the regulated voltage and current output of its AC (PS-10) or DC
(PS-20) input circuit.