41
cod. 6118005 ed. 06-2021
9.3 PROGRAMMING
SET
SET
SET
SET
SET
SET
SET
SET
SET
- _ _ _ 0 _ _ _ +
SET
+
SET
+
SET
+
SET
+
SET
+
SET
+
SET
+
SET
+
SET
+
SET
+
Press
SET
SET
to modify.
Press
SET
to enter the sub-page or to confirm
a new set value.
Press
SET
to exit the menu.
MAIN SETTINGS
Press the
SET
key repeatedly to access the desired setting.
This appears only if the hot water system
and relative probe are connected.
The detailed description for programming
switch-ons is in the following chapter.
The “Loading” menu allows changing the quantity of fuel falling and is divided into 3 increasing levels (+) and 3
decreasing levels (-), each equal to 0.2 seconds for a total of +/- 0.6 seconds. This variation remains in the mem-
ory all the time and is associated to all six operating powers at the same time.
Before selecting on the display the type of fuel to use, ensure you have put the same type of fuel in the tank, in
case refer to paragraph 6 on fuels.
Mon 09:00 Tc 65°
On 5 Ts 55°
Season
ESC SET
Season
Winter
Stove Temp.
ESC SET
Stove ESC SET
Time setting
ESC SET
Switching ON
ESC SET
Fuel
ESC SET
Loading
ESC SET
Info
ESC SET
Stove H2O
temperature 70°
Hot water H2O
temperature 55°
Time setting
00:00 01/01/2000
Activate
ESC SET
Fuel
Fuel 1
Loading
Stove
temperature 70°
Hot water
temperature 55°
Puffer
temperature 55°
Timer01 mtwtfss
ON 00:00 OFF 00:00
