ENGLISH
22
15. ALARM CODES
For your ow n sa fe ty d o not ta m pe r or m odify a ny of the m a chine 's com pone nts: the
m a nufa cture r doe s n ot gua ra nte e the norm a l ope ra tion, tha t a s a re sult m a y be ve ry da nge rou s.
In ca se o f m a lfunc tioning, diffi cultie s, or w he ne ve r a sa fe ty de vice is a ctiva te d, it i s im po rta nt to
conta ct a uthori se d pe r son ne l. All ope ra tions m u st ta ke pla ce w he n the boile r is cold a nd di sconne cte d
from the pow e r supply.
DISPLA Y
MEANI NG
Motor flue gas
Non working fumes motor: contact an authorised technician
Auger motor 1
The horizontal fuel loading auger is not turning: verify if the fuel tube is clogged or contact an
authorised technician
Crucible
The burner fire pot does not rotate: clean the burner and restart or contact the authorised
technician
1 heat.elem.KO
One of the resistors is not working: contact an authorised technician
2 heat.elem.KO
Both resistors are not working: contact an authorised technician
heat.element KO
The resistors are continually supplied with power: contact an authorised technician
gas probe
The fumes temperature probe is interrupted or disconnected: contact an authorised technician
room probe
The room temperature probe is interrupted or disconnected: contact an authorised technician
Thermost. boiler
Intervention of the boiler safety thermostat: clean the inside of the stove, reset the thermostat
and restart the stove
Thermostat auger
Intervention on the part of the fuel auger safety thermostat: clean the inside of the stove, reset
the thermostat and restart the stove
Pressure switch
Air pressure regulator is not working: contact an authorised technician
system error
Internal error of the electronic control box: turn stove off and restart it
black out
Loss of electric power: clean the burner and restart
Failed ignition
Failed start-up: clean the burner and restart
f. turn-off
Flame turns off while operating: clean the burner and restart
Over heating gas
Overheating of combustion fumes: clean the stove completely and restart.
Cont. operation
Malfunctioning of pellet loading motor: contact an authorised technician.
Boiler probe
Boiler temperature probe interrupted or disconnected: contact an authorised technician.
Hot water probe
Domestic hot water temperature probe interrupted or disconnected: contact an authorised
technician.
H2O Pressure
Hot water pressure below 0.5 bar: fill the system with water or call the authorised technician.
Filling
The filling of the fuel tank has not occurred within the pre-set time: check loading auger and fuel
availability. Call the authorised technician.
Pellet sensor
One of the fuel level sensor does not work: call the technician.
service
Stove maintenance warning: contact an authorised technician
TO R ESTO R E BOIL ER FU N CTIONI NG K EEP T H E K EY PRESSED FO R 3 SECO N DS
