CS THERMOS Arianna 10, Инструкция по эксплуатации, Страница: 29 / 52

29
code 6118250 iss. 10-2018
8.6 Connecting the flue through the stove rear outlet
The stove can be connected to the previously installed flue pipe only horizontally, on the back. A "T" piece, or an
extension followed by a "T" piece, can be connected directly.
Please use pipes suitable to discharge pressurized fumes and fitted with seals (UNI EN 1856-1 and 1856-2).
1
2
3
1
2
1 2
3
The assembly is shown with one model
of stove, the procedure for the other
models is the same.
8.7 Connecting the flue on the side of the stove
The stove can be connected to the previously installed flue by rotating the fume motor towards the side of the stove
as shown in the following images. A "T" can be connected directly to which a tube will be attached vertically.
In order to support the tube in some models, it will be enough to use the existing pre-cut piece, for others it will be
necessary to use the appropriate support bracket supplied.
Please use pipes suitable to discharge pressurized fumes and fitted with seals (UNI EN 1856-1 and 1856-2).
The assembly is shown with one model
of stove, the procedure for the other
models is the same.
Dismantle the rear panel and left back
side (1-2).
Unscrew the 2 fixing screws of the fume
motor (3).