Safety instructions
DP 400 mobil V1.00 EN
Seite 3 von 15
1 Safety instructions
1.1
General
Please check whether this manual corresponds with the device type.
Please attend to all notes indicated in this instruction manual. It contains essential information
which has to be followed during installation, operation and maintenance. Therefore, this
instruction manual has to be read categorically by the technician as well as by the responsible
user/qualified personnel before installation, initiation and maintenance.
This instruction manual has to be available at any time at the operation site of the DS 400.
Regional and national regulations respectively, have to be observed in addition to this instruction
manual if necessary.
In case of any obscurities or questions with regard to this manual or the instrument please contact
CS Instruments GmbH & Co.KG
Warning!
Supply voltage!
Contact with supply voltage carrying non-insulated parts may cause an electric shock
with injury and death.
Measures:
•
Note all applicable regulations for electrical installations (e.g. VDE 0100)!
•
Carry out maintenance only in strain less state!
•
All electric works are only allowed to be carried out by authorized qualified personnel.
Warning!
Inadmissible operating parameters!
Undercutting and exceeding respectively of limit values may cause danger to persons
and material and may lead to functional and operational disturbances.
Measures:
•
Make sure that the DP 400 mobil is only operated within the admissible limit values indicated on
the
type label.
•
Strict observance of the performance data of the DP 400 mobil in connection with the application.
•
Do not exceed the admissible storage and transportation temperature.
Further safety instructions:
•
Attention should also be paid to the applicable national regulations and safety instructions during
installation and operation.
•
The DP 400 mobil is not allowed to be used in explosive areas.
Additional remarks:
•
Do not overheat the instrument!
•
Change of battery and SD-Card are only allowed to be carried out by authorized qualified personnel
and in strain less state
Attention!
Malfunctions at the DP 400 mobil!
Faulty installation and insufficient maintenance may lead to malfunctions of the DP 400
mobil which may affect the measuring results and which may lead to misinterpretations.
