3
5. OPERATION
Once the appliance is installed, wait for at least 30 minutes before start – up. Afterwards, insert the plug in the mains
outlet.
The thermostat and the operation switch “I-0” are located behind the fitted metallic grill panel. In order to operate the
appliance, the operation switch must be on position “I” and the thermostat should be switched on the appropriate setting
(
not
on ‘0’, see figure 4&6).
Start up the appliance with no load and make sure the door is properly closed.
Wait for at least two hours so that the required temperature is achieved inside the freezer.
Store the products.
The compressor will not restart immediately, in case of starting up the appliance straight after terminating its
operation – either via the thermostat or due to power failure –. This is normal. The compressor will automatically start
soon after.
For your appliance’s protection, always wait for fifteen minutes before each restart.
After each opening the door, for a short while, you will notice some mist on the window. This is absolutely normal
and the mist will disappear completely.
Do not use electrical devices inside the food storage area of the appliance.
WARNING: we remind you that your appliance is a preserver for frozen products. It has not been designed
for the storage of products of ambient or higher temperature.
This appliance is not designed for use from the people (including children) with decreased physical , aesthetic or
intellectual abilities or with deficiency of experience and knowledge, unless they are under supervision or have been
given instructions concerning the appliance use from the person responsible for their safety.
The children have to be supervised in order to avoid playing with the device.
6. THERMOSTAT (Figure 4)
The thermostat, which is located behind the fitted metallic grill panel automatically sets the temperature inside the
appliance so that it varies from the minimum to the maximum value permitted by the chosen setting.
The thermostat position is set and checked by our company to ensure the optimum preservation temperature of products,
such as ice-cream cakes, ice creams and etc.
7. THERMOMETER
The cylindrical thermometer, which is located behind the fitted metallic grill panel that covers the engine-room
located in the appliance’s base, indicates the temperature inside the food compartment.
8. LIGHT SWITCH
The light switch, which is located behind the fitted metallic grill panel beside the thermometer, features two positions
ON – OFF and controls the internal lighting as well as the lighting of the advertising sign placed at the top of the
appliance.
The thermostat, depending on the ambient temperature and its design
classification, is capable of maintaining the products to an average
temperature from –18 to -23
ο
C. Lower temperatures can be achieved
inside the appliance when the thermostat adjustment switch is rotated
clockwise from position 1 to position 7.
When the thermostat is set to 0 (off) the appliance is switched off.
Figure 4
