Crystal CHP075PX, Руководство пользователя

Страница: 19 / 51

- 17 -
Parameter checking
and press to enter, press and to check d0-d11 value. Press
checking.
Code Condition Scope Remark
d00 IPM mould temperature 0-120
℃
Real testing value
d01 Inlet water temp. -9
℃
～
99
℃
Real testing value
d02 Outlet water temp.
-9
℃
～
99
℃
Real testing value
d03 Ambient temp. -30
℃
～
70
℃
flash if Real value<-9
d04 Frequency limitation code 0,1,2,4,8,16 Real testing value
d05 Piping temp. -30
℃
～
70
℃
flash if Real value<-9
d06 Gas exhaust temperature 0
℃
～
C5
℃
(125
℃
) Real testing value
d07 Step of EEV 0
～
99 N*5
d08
Compressor running
frequency
0
～
99Hz Real testing value
d09 Compressor current 0
～
30A Real testing value
d10 Current fan speed 0-1200 (rpm) Real testing value
d11 Error code for last time All error code
Remark:
d4: Frequency limitation code,
0: No frequency limit;
1: Coil pipe temperature limit;
2: Overheating or overcooling frequency limit;
4: Drive Current frequency limit;
8: Drive voltage frequency limit;
16: Drive high temperature frequency limit
7.2.6
Select
to exit