Crystal CHP075PX, Руководство пользователя

Страница: 13 / 51

- 11 -
(13) The below picture shows the minimum required distances on each side of the heat pump.
*Absolute Minimum Clearance dimensions*
(14) If water pressure is over 10 KPA, or water flow rate is more than 11 cubic meters through
heat exchanger, it is necessary to install the by-pass pipe in water system.
(15) Installation illustration
NOTE: The factory only provides the heat pump unit. The other items in the illustration are
necessary spare parts for the water system which are provided by users or installers.
ATTENTION:
Please follow these steps when operating for the first time :
1. Open the diversion heat pump valves to charge H/P with water and close the
by-pass valve (direct line)
2. Make sure that the pump and the water-in pipe have been filled with water.
Make sure there are no Air-Locks.
3. Start the unit