Crystal Vision
Hardware installation
Rear module connections with the RM18
The RM18 gives the maximum number of both analogue and digital outputs,
with the addition of an on board-loop though for the external reference. This
increase in available outputs again reduces packing density.
RM18 fits in all current frames
Description
RM18
•
12 modules per 4U frame
•
6 modules per 2U frame
•
3 per 1U frame
•
1 per 1U desk top box
•
1 module per rear connector
•
10 connections available
•
Card fits in upper slot
•
No card fits in lower slot
BNC –
Signal
ZLA00158
A
B
C
D
E
F
G
H
I
J
K
L
No connection
Analogue reference output 2
Analogue reference output 3
SD reference output 1
External reference input
External reference loop through output (on board loop)
No connection
SD reference output 2
SD reference output 3
SD reference output 4
Analogue reference output 1
Analogue reference output 4
Note:
The external reference loop-through will be disconnected if the board is
removed from the frame.
REFGEN User Manual R2.0
7
11 January 2019
