Crystal Vision
Using the front control panel
The ADCA412 menu structure
The main top-level menus are obtained by pressing the F1, F2, F3 and F4 keys from the
Home menu. Menu keys are illuminated when active and when further menus are
available. The four top-level menus are:
STAT (Status) – press F1
SWCH (Switch) – press F2
CNTL (Control) – press F3
OPTN (Option) – press F4
The following chart shows the majority of the available menus. The actual menus
available may vary slightly as ADCA412 software is updated.
The ADCA412 menu tree
Note:
Function keys and shaft encoder LEDs are illuminated when active.
Function keys associated with the shaft encoder for changing assigned values are shown
with a black circle.
The use of STATUS or SWITCH monitoring functions in no way affects whether the
module is operating in ‘LOCAL CONTROL MODE’, or ‘REMOTE CONTROL
MODE’.
The STATUS display data may differ from the actual settings due to Statesman, GPI
inputs or remote CONTROL settings from the front panel overriding the front PCB
control settings. Press the CAL button to update the display.
ADCA412 User Manual R2.1
12
30 October 2018
