Crystal Vision
Card-edge
control
11
26/02/2007
3.2 Reading card edge LEDs
Card edge LEDs may be used in conjunction with status information from any connected
remote status panel display or from Statesman if available.
Refer also to the trouble-shooting chapter for more help with solving problems and
monitoring status information.
The following table summarises the card edge LED functions and colours:
Name
Led
Colour
Function when ON
PSU
Green
Good power supply (PSU) rails. (Bottom LED)
Input
Green
Video input present
3.3 Card edge configuration
Component output format
Selecting the Component output format
The ENDAC can be configured to output four component analogue video formats, RGB, YUV Y’P’bP’r or
Y’C’bC’r and YUV Betacam.
Note Y’P’bP’r / Y’C’bC’r selection is selected by the positions of links PL10 and PL11.
DIL 1
Function
UP
YUV
Normal
DOWN
Sets YUV gains to output Betacam video Chroma amplitudes
Line standard
The ENDAC is able to operate in both 625 and 525 line rates.
DIL 2
Function
UP
525
525-line standard selected
DOWN
625
625-line standard selected
