Crystal Vision ENDAC, Руководство пользователя

Страница: 18 / 25

Crystal Vision
Trouble shooting
17
26/02/2007
Input Menu
The Input configuration menu allows the user to set the video operating standard for the
ENDAC.
Video Configuration menu structure Description
Toggle
F2
to set the operating mode to be either PAL
625-line or NTSC 525-line.
Output Menu
This menu gives access to the output configuration controls.
When NTSC input standard is selected the analogue output can have a 7.5% IRE setup (pedestal) applied. The
Chroma amplitude is also adjusted accordingly.
The ENDAC can be configured to output four component analogue video formats, RGB, YUV Y’P’bP’r or
Y’C’bC’r and YUV Betacam.
Note Y’P’bP’r / Y’C’bC’r selection is selected by the positions of links PL10 and PL11.
Output configuration menu Description
F1
NTSC. Toggle for M or J. N/A in PAL mode.
F3
BETA. Toggle for BETA or Normal. Only active
if YUV output is selected.
F4
VID. Toggle for YUV or RGB
Note. M/J and BETA modes will interact globally with composite and component
outputs.