Crystal Vision
Specification
23
26/02/2007
7 Specification
General
Dimensions
100 mm x 266 mm module with DIN 41612 connector
Weight
150g
Power consumption
6 W
Inputs
270Mb/s serial digital to EBU Tech 3267-E and SMPTE-259M.
Cable equalisation >200m Belden 8281 or equivalent.
Outputs
4 x composite, 2 x composite plus YC, 1 x composite plus YUV/RGB
Sampling
12-bit precision
Frequency response
±
0.5dB to 5.5MHz
Gain error
<1.0%
Differential phase
<1.5%
Differential gain
<1.5%
Signal to noise
<-60dB
Control and status
Control
Board edge control using 8-way DIL switch and LEDs, active control panel or
Statesman PC control software.
GPI Alarm
Input absent
Electrically: Open drain FET 30V, 220
Ω
current limit resistors. Pulled up to
+5V through 10k
Ω
.
LEDs
PSU okay, Input present.
Ordering
information
ENDAC
12-bit encoder module.
Rear Connectors
RM01
Single height rear connector
Frames
Indigo 1
1U frame with passive front panel for up to 6 modules
Indigo DT
Desk top box with passive front panel for up to 2 modules
Indigo 2A
2U frame, Statesman enabled with active control panel for up 12 modules
Indigo 1A
1U frame, Statesman enabled with active control panel for up 6 modules
Indigo DTA
Desk top box, Statesman enabled with active control panel for up 2 modules
Indigo 4S
4U frame with passive front panel fitted with Statesman CPU for up to 24
modules
