part
Cf1/miami part no
Manhattan part no
DOOR GLASS ASSEMBLY
cf1
Man 1
Gas control
cf2
Man 2
handset
cf3
Man 3
receiver
cf4
man4
log set
cf5
man5
Driftwood set
cf6
man6
pebbles
cf7
man7
granules
cf8
man8
Bark chipping
cf9
man9
Ods pilot assembly seagas
cf10
man10
Injector 440
cf11
man11
ODS pilot assembly SIT
CF12
man12
26 issue 5
23:4
Changing the Gas Control.
Follow Section 23:1 Removing the Burner Mounting Plate Assembly.
If Logs or Driftwood is being used remove and retain the 3 screws securing the Log Support to prevent it becoming
damaged
Remove and retain the 3 screws securing the Air Guide.
With the Burner Mounting Plate Assembly upside down disconnect the Electrode Lead from the Pilot Electrode,
disconnect the Pilot Pipe from the back of the Main Control and the Thermocouple from the Main Gas Control.
Disconnect the Outlet/Injector Pipe and the Main Inlet Pipe.
Remove and retain the 2 screws securing the Main Control.
Fit the new Control and replace all parts in reverse order.
For refitting the Fuel Bed components see relevant section
Check all faults have been corrected then re-commission the fire, conducting the usual safety checks and specifically
gas soundness and spillage tests.
Fit new batteries into the Handset and Receiver
Finally with the Outer Door Closed ensure the Remote Control Handset operates the fire correctly.
