19 issue 5
20:5
Fitting Log or Driftwood No3
Fit
Log or Driftwood No3
next to the last
Piece ensuring the hole in the base locates
Onto the metal peg at the front and it rests
On the
Large
Rear Log/Driftwood
as shown.
Fig 18:5
.
Fig 18:5
20:6
Fitting ‘V’ Log or Driftwood No4
Fit
‘V’ Shaped Log or Driftwood No4
Next to the last piece ensuring the hole
In the base locates onto the metal peg
At the front and it rests around the
Branch
on the
Large Rear Log/Driftwood
As shown
Fig. 18:6
Fig 18:6
18:7
Fitting Log or Driftwood No5
Fit Log
or Driftwood No5
next to the last
Piece ensuring the hole in the base locates
Onto the metal peg at the front and it rests
On the
Large Rear Log/Driftwood
as shown in
20:8Fitting Log or Driftwood No6
Fit the last
Log or Driftwood No6
at the far
Right
Hand side ensuring the hole in the base locates
Onto the metal peg at the front and it rests
In the groove in the rear
Large Rear Log/
Driftwood
as shown.
Adjust the
granules
between
The
Log/Driftwood
to hide any metalwork that
may
Be showing see
Fig. 18:8
Fig 18:7
Fig 18:8
