Crypto URC-601A, Руководство пользователя

Страница: 5 / 45

URC-601A User Manual/Εγχειρίδιο Χρήσης
4
2.1.2 Manual code search programming
1. Turn on your TV you want to program to work
with the Crypto URC-601A remote control. Hold
the remote in a straight line in front of your TV at
a distance less than 1 meter.
2. Press the remote device mode button
and button at the same time until the red
light indicator lights up constantly.
3. Press the button or the button one
step at a time until your TV turns off. Every time
you press the or buttons the
button will blink once
4. When the TV turns off it means that the
remote have found the correct code for your TV.
5. Press the button to store the code. The
button light will turn off.
Note:
·
At step 3 you can hold down or
button constantly until the TV turns off. Attention:
When the TV turns off you must release the
button immediately so that the remote wont go to
the next code.
·
For this feature you can press to search
forward and to search backward the code
libraries in the remote control.Given the size of
the code libraries in the remote control, it will take
several minutes to cycle through all the codes
Actions to verify correct programming
Once you have stored on the remote the correct code, check to see if most of the
buttons are working according to the functions of your TV.
Corrective Actions
If any of the buttons do not work properly, you can program those buttons individually
by using the learning function process described in chapter 3.