Crypto URC-601A, Руководство пользователя

Страница: 13 / 45

URC-601A User Manual/Εγχειρίδιο Χρήσης
12
For our example if you now press the
macro button then the TV will change
the source signal to the selected input
connection the DVB-T will turn on and
you will control it with the remote.
Note:
·
You can program up to 15 different key functions
·
If in 30 seconds no key is been pressed then the red light will
turn off and the procedure is going to be canceled.
If you press the MACRO key while it is not programmed nothing will
happen.
• Before using the MACRO programming make sure that the remote is
programmed to control all the devices you want to program by using the
MACRO function. To do this use the programming methods and the learning
function indicated in the above chapters of this guide.
• In step 2 depending on your TV you can press the buttons as many times,
to change the signal source from TV to the source that your DVB-T is
connected.
Erase MACRO Programming:
Press the DVB-T button and at the same time until the device indication
light turn on constantly.
To erase MACRO1 button press code 9960 and then OK button.
To erase MACRO2 button press code 9961 and then OK button.
5 DEVICE CODE REMINDER
You can use this feature to check the code digits that is stored for a device. Follow
these steps using the remote control:
Press the device button that you want once.
Press and hold button and press at the same time one of numbers 1,2,3,4.
Release buttons and the device light will blink as many times according to the number.
If number is 0 then the light will blink fast 10 times.
For example let’s say the device code is 1029
Press and button number 1: the device light will blink 1 time
Press and button number 2: the device light will blink fast 10 times