SOOGM-16V
Radio Replacement with OnStar, SWC Retention and
Video Switcher for GM LAN 29 Bit Vehicles
RADIO REPLACEMENT
SWC RETENTION
+
R
INTERFACING SOLUTIONS
Crux Interfacing Solutions • 6860 Canby Ave., Suite 104, Reseda, CA 91335
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.122518
For vehicles with a factory reverse camera installed, the factory camera module must be powered up to enable the
forced view feature of the SOOGM-16V. Connect the Reverse Gear Wire (RED/WHITE) on the SOOGM-16V harness
to the reverse camera power wire located on the reverse camera module or BCM. The factory reverse camera
module or BCM can be found in different locations in the vehicle depending on the year and model. The chart below
will aid in locating the reverse camera module or BCM.
Use a 1N4001 diode to isolate the factory reverse camera power wire. See diagram below.
REVERSE WIRE CONNECTION:
Factory
Reverse
Camera
Module
Reverse Gear Wire on
SOOGM-16V (RED/WHITE)
Factory Reverse Camera Wire
(BLUE or Light Green)
1N4001 Diode
YEAR/MODEL
LOCATION
WIRE COLOR
2007 – 2008
All Models
Under front passenger
seat
BLUE
Pin 1 of 8-pin Connector
2009
Avalanche, Escalade,
Suburban, Tahoe, Yukon
2011
Tahoe
Junction block next to the
steering column
(See wiring connection
diagram on the next page)
BLUE
Pin 8 of Gray Connector
DARK BLUE
PIN 5 of Gray (X11) Con-
nector
2009
Hummer H2
BCM to the left of the
steering column
BLUE
Pin 4 of Brown Connector
2009
Acadia, Enclave, Outlook,
Traverse
BCM to the left of the
steering column
BLUE
Pin 3 of Gray Connector
2009
Silverado, Sierra
BCM to the left of the
steering column
LIGHT GREEN
Pin 2 of Connector 7
2009
Vue
BCM under the radio
LIGHT GREEN
Pin 2 of Connector 6
4 of 6
