background image

The SOOGM-16V has a potentiometer to adjust the chime 

volume.  It    is set at half way by default. To adjust the 

volume, simply use a suitable screw driver and turn the 

potentiometer clockwise to increase the volume and counter-

clockwise to decrease the volume.

Chime

Volume

Adjustment

CHIME VOLUME ADJUSTMENT:

To adjust the OnStar volume, turn on OnStar and adjust the volume using the Steering Wheel Control volume 

adjustment. Once it is set, the SOOGM-16V will memorize this level.

ONSTAR VOLUME ADJUSTMENT:

Part# CJA2333A can be special ordered to retain the Rear Seat Entertainment (RSE).

1.  Connect the rear seat entertainment 16-pin connector to the vehicle’s 16-pin factory connector.

2.  Connect the RCAs to the aftermarket radio audio and video inputs.
3.  Test the audio and video before installing the radio into the dashboard.

REAR SEAT ENTERTAINMENT (RSE):

Connect to

Ground

OEM O

ver

head

Scr

een

BACKUP CAMERA CONNECTION:

The SOOGM-16V includes a video harness that allows a front and rear view camera to be plugged in and viewed on 

the aftermarket radio screen.  The video harness includes a 16-pin brown connector that plugs into the OEM rear view 

camera harness to retain the use of the OEM rear view camera (if equipped). The two female video RCAs are used to 

connect an aftermarket front and rear view camera (if vehicle is not equipped with an OEM rear view camera).

3 of 6

Video Out
Front Camera
Rear Camera

To OEM Camera

Harness

Brown 16-Pin

Connector

To SOOGM-16V

Module (CAM)

1     2     3      4

ON

SWC DIP SWC

CAM

SOOGM-16V

Radio Replacement with OnStar, SWC Retention and

Video Switcher for GM LAN 29 Bit Vehicles

RADIO REPLACEMENT

SWC RETENTION

+

R

INTERFACING SOLUTIONS

Crux Interfacing Solutions • 6860 Canby Ave., Suite 104, Reseda, CA  91335

phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com

rev.122518

1     2     3

ON

DIP 1:  ON = OnStar Activation

 

OFF = Aftermarket Radio VR*

DIP 2:  ON = Front Camera ON

DIP 3:  No Function

*NOTE: If DIP 1 is set to OFF, use the OnStar button on the rear view mirror to activate OnStar.

Содержание SOOGM-16V







Отзывы: