CRS Sam4s SPS-300 Series Скачать руководство пользователя страница 50 | Manualshive

Страница: 50 / 291

CRS Sam4s SPS-300 Series Скачать руководство пользователя страница 50

50 • Operations

SAM4s SPS-300 Operator's & Programming Manual v1.4

Promo

The

PROMO

key allows you to account for promotional items, as in "buy two, and get one

free". Pressing this key will remove an item's cost from the sale, and the promo item will not be
added to the PLU sales total, but it is added to the item sales counter. If stock (inventory)
reporting is used, the item will be subtracted from inventory.

1.

Register an item. For example, press
PLU

1

programmed with a price of $1.00

for price level 1.

1

2.

Press the

PROMO

key. The message

"PROMO" displays.

PROMO

3.

Enter the item to be promo'd. You can
not enter an item that has not been
already registered in this transaction.

1

THANK-YOU

CALL AGAIN

DATE 06/05/2011 SUN TIME 08:33

PLU1 $1.00

***PROMO***

PLU1
TOTAL $0.00
CASH $0.00
CLERK 1 No.000011 00001

Waste

The

WASTE

key allows control of inventory by accounting for items that must be removed from

stock due to spoilage, breakage or mistakes. Press the

WASTE

key before entering wasted items,

and then press the

WASTE

key again to finalize. The

WASTE

key may be under manager

control, requiring the control lock to be in the

X

position. The

WASTE

key is not allowed within

a sale.

1.

Press the

WASTE

key. The message

"WASTE" displays at the top of the
screen.

WASTE

2.

Enter the item or items that are wasted.

3.

Press the

WASTE

key again to total the

wasted items:

WASTE

THANK-YOU

CALL AGAIN

DATE 06/05/2011 SUN TIME 08:33

***WASTE***

PLU1 $1.25
PLU2 $1.50

***WASTE***

TOTAL $2.75
CLERK 1 No.000011 00001

«
...
48
49
50
51
52
...
»

Содержание Sam4s SPS-300 Series




































































































































































































































































































Отзывы:

Нет отзывов