manualshive.com logo in svg

CRS SAM4s ER-180U Series, Руководство оператора и программирования

Описание продукта CRS SAM4s ER-180U Series: Бесплатный операторский и программный руководство для скачивания на manualshive.com. Полный мануал доступен на русском языке. Этот компактный кассовый аппарат обеспечивает эффективное управление продажами. Мгновенный доступ ко всем настройкам и функциям с помощью руководства.

Поделиться
Скачать
background image

 

CRS, Inc. 

Limited Warranty and Disclaimers of Warranty 

This manual has been developed by CRS, Inc.    It is intended for the use of its customers and service personnel and should be read in its 
entirety before attempting to install, use or program the product(s).     
Nothing contained in this manual shall be deemed to be, and this manual does not constitute, a warranty of, or representation with respect 
to, the product or any of the products to which this manual applies.    This manual is subject to change without notice and CRS, Inc. has 
no obligation to provide any updates or corrections to this manual.    Further, CRS, Inc. also reserves the right, without prior notice, to 
make changes in equipment design or components as it deems appropriate.    No representation is made that this manual is complete or 
accurate in all respects and CRS, Inc. shall not be liable for any errors or omissions contained in this manual.    In no event shall CRS, 
Inc. be liable for any incidental or consequential damages relating to or arising out of the use of this manual.    This document contains 
proprietary information that is protected by copyright.    All rights are reserved.    No part of this document may be photocopied or 
reproduced without prior written consent of CRS, Inc.     

NOTICE 

IF ANY WARRANTY IS EXTENDED TO YOU WITH REGARD TO THE PRODUCT(S) TO WHICH THIS MANUAL APPLIES, IT 
IS A WARRANTY FROM THE ENTITY OR INDIVIDUAL FROM WHOM YOU DIRECTLY PURCHASED THE PRODUCT(S).   
SUBJECT TO THE FOREGOING, UNLESS YOU ARE A DIRECT END USER CUSTOMER OF CRS, INC., CRS, INC. DOES NOT 
EXTEND TO YOU ANY EXPRESS WARRANTY OR ANY IMPLIED WARRANTY AND EXPRESSLY DISCLAIMS ANY 
IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR USE, OR FITNESS FOR ANY PARTICULAR PURPOSE, OR 
ANY WARRANTY OF NON-INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS IN CONNECTION WITH THE 
PRODUCT(S) OR ANY SOFTWARE, DRIVERS, OR PROGRAMMING PRODUCT, WHETHER EMBEDDED IN PRODUCT(S) OR 
PROVIDED AS A SEPARATE PROGRAM, OR USED IN CONJUNCTION WITH THIS/THESE PRODUCT(S).    CRS, INC. 
SPECIFICALLY DOES NOT WARRANT THAT THE OPERATION OF ANY DRIVERS, SOFTWARE, OR PROGRAMMING 
PRODUCTS LICENSED HEREUNDER, WHETHER EMBEDDED IN PRODUCTS OR PROVIDED AS SEPARATE PROGRAMS, 
SHALL BE UNINTERRUPTED OR ERROR FREE OR THAT FUNCTIONS CONTAINED IN SUCH DRIVERS, SOFTWARE OR 
PROGRAMMING PRODUCTS SHALL OPERATE IN COMBINATION(S) WHICH MAY BE SELECTED FOR USE BY YOU OR 
OTHERWISE MEET YOUR REQUIREMENTS.     
CRS, Inc. is not responsible for any damages or loss, either direct, indirect, special, incidental or consequential, which you may 
experience as a result of your purchase or use of the product(s).    Your sole remedy in the event that you encounter any difficulties with 
the product(s) is against the entity or individual from whom you purchased the product(s). 
Revision 2.0 - April 1, 2005 

WARNING - U.S.

 

THIS EQUIPMENT GENERATES, USES AND CAN RADIATE RADIO FREQUENCY ENERGY, AND IF NOT INSTALLED AND USED 
IN ACCORDANCE WITH THE INSTRUCTIONS MANUAL, MAY CAUSE INTERFERENCE TO RADIO COMMUNICATIONS.    IT HAS 
BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A COMPUTING DEVICE PURSUANT TO SUBPART J 
OF PART 15 OF FCC RULES WHICH ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST SUCH 
INTERFERENCE WHEN OPERATED IN A COMMERCIAL ENVIRONMENT.    OPERATIONS OF THE EQUIPMENT IN A 
RESIDENTIAL AREA IS LIKELY TO CAUSE INTERFERENCE IN WHICH CASE THE USER, AT HIS OWN EXPENSE, WILL BE 
REQUIRED TO TAKE WHATEVER MEASURES MAY BE REQUIRED TO CORRECT THE INTERFERENCE.     

NOTICE - CANADA

 

THIS APPARATUS COMPLIES WITH THE CLASS “A” LIMITS FOR RADIO INTERFERENCE AS SPECIFIED IN THE CANADIAN 
Department OF COMMUNICATIONS RADIO INTERFERENCE REGULATIONS.     

CET APPAREIL EST CONFORME AUX NORMES CLASS “A” D’INTERFERENCE RADIO TEL QUE SPECIFIER PAR MINISTRE 
CANADIEN DES COMMUNICATIONS DANS LES REGLEMENTS D’INTERFERENCE RADIO. 

ATTENTION

 

The product that you have purchased may contain a battery that may be recyclable.    At the end of its useful life, under various state 
and local laws, it may be illegal to dispose of the battery into the municipal waste system.     

Check with your local solid waste officials for details concerning recycling options or proper disposal

.   

LICENSE DETAILS 

FreeRTOS   

This product contains software which is linked to FreeRTOS V8.0.1 - Copyright (C) 2014 Real Time Engineers Ltd. FreeRTOS V8.0.1 is 
licensed by the modified GNU General Public License (GPL) Version 2 (see the licensing section of http:// www.FreeRTOS.org for full 
details).   

 

Содержание SAM4s ER-180U Series






























































































Отзывы:

Нет отзывов

Похожие инструкции для SAM4s ER-180U Series

Polar Electro GD882-A Instruction Manual preview
GD882-A
Бренд: Polar Electro Страницы: 8
Royal 135dx Instruction Manual preview
135dx
Бренд: Royal Страницы: 51
Banner Sure Cross P16E Series Manual preview
Sure Cross P16E Series
Бренд: Banner Страницы: 8
saia-burgess CXG 21 Operating Instructions Manual preview
CXG 21
Бренд: saia-burgess Страницы: 32
Sam4s ER-180T Service Manual preview
ER-180T
Бренд: Sam4s Страницы: 65
Jepower C158 User Manual preview
C158
Бренд: Jepower Страницы: 30
Olivetti ECR 7100 Service Manual preview
ECR 7100
Бренд: Olivetti Страницы: 61
Olivetti ECR 8220 S User Manual preview
ECR 8220 S
Бренд: Olivetti Страницы: 80
Siemens SIMATIC S5 System Manual preview
SIMATIC S5
Бренд: Siemens Страницы: 536
Sam4s ER-5200 Operation And Program Manual preview
ER-5200
Бренд: Sam4s Страницы: 7
logos biosystems L10001 User Manual preview
L10001
Бренд: logos biosystems Страницы: 59

Бренды по названию

Популярные бренды

Загрузить еще бренды