TS 077 R01
2
fig. 1
1.
Locate the locking clamps (B) into the recesses found on both sides of the raised toilet
seat (A). Twist the screws on the locking clamps (B) a small amount clockwise to engage
them into the raised seat.
(See Fig. 1)
IMPORTANT! Do not tighten the locking clamps (B) all the way as this will mean the raised
toilet seat (A) will not fit on the toilet pan.
B
B
fig. 2
2.
Loosely align the locking clamps (B) with
the sides of your toilet pan. Rest the
raised toilet seat (A) onto the toilet pan.
(See
Fig. 2)
Note: Ensure the locking clamps (B) are
located on the outside edge of your toilet
pan and do not interfere with the pan.
fig. 2
3.
Push the raised toilet seat (A) back until
the front tab contacts the front of the
pan. Turn both the locking clamp (B) screws
clockwise to grip the seat onto the edge of
the pan.
(See Fig. 3)
Note: You may need to adjust the left and
right locking clamps to make the seat
central.
IMPORTANT! You must ensure the seat is
securely fastened with the locking clamps
(B) before use.
