background image

IQ Digital Processor / Digital Mixer

Printed on

Printed on

Printed on

Printed on

Printed on

recycled paper.

recycled paper.

recycled paper.

recycled paper.

recycled paper.

-USM 810

-12 dB

-12 dB

-12 dB

-12 dB

0 dB

0 dB

0 dB

0 dB

+9 dB

+9 dB

+9 dB

+9 dB

Obtaining Other Language Versions:

Obtaining Other Language Versions:

Obtaining Other Language Versions:

Obtaining Other Language Versions:

Obtaining Other Language Versions: To obtain information in another language about the use of this prod-
uct, please contact your local Crown Distributor. If you need assistance locating your local distributor, please
contact Crown at 574-294-8000.

This manual does not include all of the details of design, production, or variations of the equipment. Nor does
it cover every possible situation which may arise during installation, operation or maintenance.

The information provided in this manual was deemed accurate as of the publication date. However, updates to
this information may have occurred. To obtain the latest version of this manual, please visit the Crown website
at www.crownaudio.com

Trademark Notice:

Trademark Notice:

Trademark Notice:

Trademark Notice:

Trademark Notice: Crown , Crown Audio, IQ , IQ System

 

and PZM

 

are registered trademarks of Crown

International. Other trademarks are the property of their respective owners.

© 2004 by Crown Audio

®

, Inc., P.O. Box 1000, Elkhart, Indiana 46515-1000 U.S.A. Telephone: 574-294-8000

                                                                                                                                                            126752-4
                                                                                                                                                                8/04

Содержание IQ-USM 810









































Отзывы: