Crown Broadcast FM 20/100 W, user manual– 05/2013
Page 23
Crown Broadcast, a division of International Radio & Electronics Corporation 25166 Leer Drive, Elkhart, Indiana, 46514-5425 USA
Ph +1 (574) 262 8900
4.2.4. MPX
configuration
G O
T O
-> S T E N C O D E R >
Press the “+” key until you see the ST Encoder menu.
Then press the “Enter” key.
1
S T
E N C O D E R
-> M O / S T : S T E R E O
1
G O
T O
M A I N
-> C O D E R
Press once again the “Enter” key to set the audio type.
Select what you need using “+” and “–” keys:
STEREO
MONO
MONO_L
MONO_R
Selecting STEREO enables the internal 19 kHz; you will
therefore want to select MONO for an MPX input.
Confirm with the “Enter” key and press “+” until you see
this screen. When the CODER menu is selected, press
“Enter” to return to the list of menus.
G O
T O
-> S T E N C O D E R >
G O
T O
-> M O D U L A T I O N >
Press the “+” key until you see the Modulation menu.
Then press the “Enter” key.
1
M O D U L A T I O N
-> D E V M P X : 1 2 7 . 2
1
M O D U L A T I O N
-> D E V P I L O T : 1 8 . 4
Browse through the Modulation menu using the “+” and “–”
keys to set the total deviation between 0 and 150 kHz,
Set the pilot deviation between 0 and 25.5 kHz.
For each of these values, use the “Enter” key to switch to
edit mode, the “+” and “–” keys to adjust values and the
“Enter” key to confirm.
1
G O
T O
M A I N -> M O D U L A T I O N
Press the “+” key until you see this screen. When the
Modulation menu is selected, press “Enter” to return to the
list of menus.
