Crown Broadcast FM 20/100 W, user manual– 05/2013
Page 114
Crown Broadcast, a division of International Radio & Electronics Corporation 25166 Leer Drive, Elkhart, Indiana, 46514-5425 USA
Ph +1 (574) 262 8900
9.5.2. Advanced Encoder
The advanced encoder can be set using serial commands (see section 6.2.7) or the web interface but not
with the front panel.
PS Scroll
Set the PS scroll on this page.
For each line of PS text, set:
Text:
Text may include dynamic data (<ITEM….>, <INFO…>…) that will only be sent if filled in, and
for ITEM type fields if the validity time frame is correct.
Repetition:
The encoder will repeat the line before sending the next one (max: 99 times).
Enabled:
Check the box for the line to be sent.
Center:
When scrolling is done word by word, the encoder may center each word in the receiver
screen. Only applicable when ‘Word’ is the chosen increment
Truncated:
Set the number of scrolling characters. Scrolling may be done by word. In that case, the
encoder will detect whole words (identifiable delimiters are: ‘ ‘, ‘-‘, ‘,’), and fit as many whole words as
possible on each screen.
Increment:
When scrolling is done word by word, the encoder truncates words longer than the
display screen (longer than 8 characters). Only applicable when ‘Word’ is the chosen increment.
Delay:
Time laps between 2 consecutive screens.
