Crowcon Q-Test, Руководство пользователя и оператора

Страница: 9 / 30

9
The Q-Test can be mounted on a standard DIN rail type EN 50022 À or screwed to a suitable flat
surface through the 3 holes
Á
in the module’s main body (see below).
The recommended length of DIN rail if a Q-Test is to be mounted on its own, is 150mm.
If the Q-Test is to be used in conjunction with a cylinder holder, the recommend length of DIN rail
required is 250mm.
The recommended length of DIN rail if a Powered Q-Test is to be mounted on its own, is 275mm
(this is supplied with the powered Q-Test).
If the Powered Q-Test is to be used in conjunction with a cylinder holder, the recommend length of
DIN rail required is 350mm.
Mount the DIN rail to the wall (flat side against the wall), allowing space on at least one side to slide
the Q-Test on.
The cylinder holder is available to mount on the DIN rail or direct to the wall.
i
Ensure that when the Q-Test is mounted, the Gas-Pro screen and operator button will be
accessible (see
Figure 7
on
page 12
).
Figure 2: Mounting the Q-Test
À
Á
Contents
Exit
Prologue
Set-up
Operation
Service and
maintenance
Specification
Warranty
Unpacking
Contacts
Troubleshooting