12
2. Operation
2.1 Inserting the Gas-Pro
Turn the Gas-Pro on, wait for it to finish the start up process and then insert the Gas-Pro into the
Q-test as shown below:
Figure 6: Inserting the Gas-Pro
2.2 Gas-Pro control
When the Gas-Pro is inserted into the Q-Test, you will need to see the display screen
À
and have
access to the operator button
Á
(see below).
Figure 7: Gas-Pro controls
À
Á
Â
Ã
À
Á
Contents
Exit
Prologue
Set-up
Operation
Service and
maintenance
Specification
Warranty
Unpacking
Contacts
Troubleshooting
