10
1.2 Prior to use
1.2.1 Opening the Q-Test
Press the release button
À
and lower the door
Á
as shown below:
Figure 3: Opening the Q-Test
There are two open levels, if left to fall the door will open to 45º. The door can be fully opened by
pulling the door down gently.
1.2.2 Inspection
Before use, the Q-Test should always be checked for any signs of physical damage, paying special
attention to the flow gasket
À
, the gas inlet pipe
Á
and gas exhaust pipe
Â
. Ensure there is no
damage to the gasket; this could result in poor gas flow.
Figure 4: Inspection prior to use
À
Á
Â
À
Á
Contents
Exit
Prologue
Set-up
Operation
Service and
maintenance
Specification
Warranty
Unpacking
Contacts
Troubleshooting
