thecrowgroup.com
Page | 22
Time Zone Assignment
Parameter
Description
Default Configuration
User Controlled by Time
Zone
When the user controlled by time zone, the keypad code
and pendant are not active, when the time zone is not
started or finished. Only when the time zone started, the
user can perform actions in the system in accordance with
its rights as defined by configuration.
Not assigned
Handset Assignment
Parameter
Description
Default Configuration
User assignment to handset
The device refers to the SH-fall device, this feature used to
associate handset to a user, the system supports up to 4
devices, and each of the devices is associated with one
user only. When activating an example panic from SH-Fall,
the system creates an event that contains the user name
ID.
Disable
Permissions
Parameter
Description
Default Configuration
User can change his code and
name
The user can change his code number and name
Enable for all users
User can change all codes and
names
They user can change code number and name for all users.
Disabled
Pendants
Parameter
Description
Default Configuration
Learn user pendant
Enter the unique serial ID of the pendant (remote
control) or Panic watch device and save configuration
Empty
Delete user pendant
Delete existing pendant from memory
Delete user pendant and send configuration to panel
-
Pendant can disarm at
alarm only
If this option is enable, the pendant can disarm the
alarm during alarm only. If this option is off, the
pendant cannot disarm the panel in any state.
Disable
