thecrowgroup.com
Page | 11
Quick Install Guide
Enter the installer code (by default the code is 000000).
For security reasons, it is highly recommended to change the installer code. Go to "Miscellaneous”, change the installer code
in Panel Options, and submit.
Users codes and names
_________________________________________________________________________________
SHEPHERD™ panel can manage up to 20 users, click on User to change its code and set the options if required.
Learn remote pendant by inserting its unique ID number and submit configuration.
Note: to activate pendants, press and hold the two lower buttons of the remote control
device.
Remote led shows green light on the end of learning successfully.
Areas Names __________________________________________________________________________________________
SHEPHERD™ panel offers up to 4 areas (partitions), select the Area # to program and see all options.
Zones
_______________________________________________________________________________________________________________________
SHEPHERD panels offers up to 64 wireless zones (ISM /Extender ISM or DECT ULE), click on required zone # to display its
options.
•
Click on ADD zone button, select the link type ISM for RF devices, Insert unique ID number of the device, device type
selected automatically or can be select manually. (NOTE: there is special section that shows how to pair DECT devices in
the next para.)
•
Set up working mode of the zone (Stay mode, 24-hour…) and more options if required.
•
Find installation and learning instructions for each device stored in the CROW website section support and download
•
Save configuration by clicking on the save configuration button.
Note: DECT Devices
The pairing of DECT ULE device must be preliminarily pairing performed from "Communication" → "DECT" → "Learn DECT
Device".( NOTE: ensure DECT is enabled)
When the DECT device pairing is done, then you can go to Zones level and assign the paired DECT device ID to a zone
between zones 1 to 64. Chose link type “DECT” and then assign to a Zone.
Click save configuration button to save changes and activate learned zones.
